Latest news about Quanzhou Smarts Electronic & Technology Co.,Ltd.

What is RGB LED lights？ Nov 08 ,2021

RGB refers to Red, Green and Blue. These are the three primary colours of the additive colour system. In lighting we encounter RGB for coloured lighting. RGB lighting enables you to create millions of different colours of light, all based on these three primary colours. Now that you know how RGB LED...

How do you choose triac, 0-10V ,or Dali dimming mode? Nov 03 ,2021

Triac dimming is the simplest and traditional lighting dimming mode. In the past, electricians used to use more traditional methods for the circuit wiring of houses, without considering leaving a few more control wires and so on. If you want to use dimming, you have no other choice. You can only use...

New version 60w 96w Triac/ ELV/ MLV dimming electronic transformer from Smarts Electronics Nov 01 ,2021

Smarts has developed a electronics transformer 60w 96w that produce THD<20%@120V Max. Load. Also, they are economical , covering the range from visible light to near-infrared light. this LED uses a fluorescent material featuring a continuous spectrum, making it advantageous for use in the followi...

What aspects should be paid attention to for led power supply? Oct 29 ,2021

When designing LED outdoor power supplies, pay attention to the problems caused by factors such as waterproof, high temperature, lightning strikes, etc. In order to eliminate the destructive potential difference caused by lightning, power lines, signal lines, metal pipes, etc. must be eq...

What are the main LED dimming technologies? Oct 27 ,2021

1: triac dimming. From the current point of view, the dimming power supply compatible with triac is usually very low in efficiency, and it is difficult to achieve 80%, which is contrary to the original intention of LED energy saving. 2: Linear dimming. The special dimming foot of the con...

What are the application scope and functions of LED dimming power supply? Oct 25 ,2021

0-10V dimming is also called 0-10V signal dimming, which is an analog dimming method. It controls the output current of the power supply by changing the voltage of 0-10V to achieve dimming. It is brightest at 10V, and off at 0V. The stability of the 0-10v LED dimming power supply is very...