As per the feedback from our customers, we have improved the design of Junction box for 24v triac dimmable led driver and 0-10V dimmable driver and will supply the new version for following order of 12V triac dimmable led drivers.

See picture of Junction box between old and new version, you will see there are 3 places difference, they are:

1. Take out the 2 plates in the junction box

2. Move up the "G" ground pole.

3. Add 22mm holes at the botton of Jbox ( both input side & output side)

Note: the size of junction box and the places where the screw holes its will still be the same.

If any suggestion/ comments on our products, warm welcome!
Thank you!