SLIM sizeplastic casing ip 20W 0 10v dimmable led power supply for led lighting
SLIM sizeplastic casing ip 20W 0 10v dimmable led power supply for led lighting
SLIM sizeplastic casing ip 20W 0 10v dimmable led power supply for led lighting
This constant voltage 0-10V dimmable LED power supply features built-in active PFC function and boasts an efficiency of up to 90%. Its plastic casing design ensures excellent heat dissipation, making it suitable for installation in confined indoor LED lighting projects. It complies with global safety lighting regulations and comes with an extended 7-year warranty.
Specification
| Model | SMT-24096-2C-TWVD-A | SMT-48096-2C-TWVD-A | |
| Certificate | UL / cUL / FCC / Class P / Class 2 / TYPE HL / SELV / ROHS / REACH | ||
| Output | Rated Voltage | 24V | 48V |
| DC Voltage | 24-26V adjust by NFC | 48-50V adjust by NFC | |
| Voltage Tolerance | ±0.5V | ±0.5V | |
| Voltage Regulation | ≤0.5% | ≤0.5% | |
| Load Regulation | ≤1% | ≤1% | |
| Rated current | 4A | 2A | |
| Rated power | 96W | ||
| Input | Voltage Range | 100-277VAC | |
| Frequency Range | 50 / 60Hz | ||
| Power Factor (Typ.) @ full load | >0.95 | ||
| THD(Typ. ) @ full load | ≤15% | ||
| Efficiency(Typ.) @ full load | 88%@120VAC 89%@230VAC 90%@277VAC | 88%@120VAC 89%@230VAC 90%@277VAC | |
| AC Current (Max.) | 1.2A | ||
| Inrush Current (Typ.) | 28A, 320us @50%120VAC 90A, 76us @50%230VAC 58A, 260us @50%277VAC | ||
| Leakage current | <0.5mA | ||
| Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed. | |
| Over Load | 105%~120% Hiccup mode, recovers automatically after fault condition is removed. | ||
| Over temperature | Shell surface temp.100℃±10℃ shut down o/p voltage, automatically recover after cooling. | ||
| Environment | Working TEMP. | -40~+60℃ (see below derating curve) | |
| Working Humidity | 20 -95%RH non-condensing | ||
| Storage TEM.,Humidity | -40 - +80℃,10 - 95% RH non-condensing | ||
| TEMP.coefficient | ±0.03%/℃(0 - 50℃) | ||
| Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72 min. each along X,Y,Z axes | ||
| Safety & EMC | Safety standards | UL8750; CAN/CSA-C22.2 No. 250.13 | |
| Withstand voltage | I/P-O/P:1.88KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | ||
| Isolation resistance | I/P-O/P:100MΩ / 500VDC / 25℃ / 70%RH | ||
| EMC Immunity | FCC/ICES do not request this test. | ||
| EMC Emission | FCC CFR Title 47 Part 15 Subpart B:2020; ICES-005 Issue 5 | ||
| Others | Net Weight | 0.83KG | |
| Dimension | 232*78*25.1mm(L*W*H) | ||
| Packing | 300*280*215mm 20pcs/CTN | ||
| Notes | 1. All parameters NOT specially mentioned are measured at 120VAC input,rated load and 25℃ of ambient temperature. | ||
| 2. Under low input voltage, derating output is required to ensure a long life. | |||
Mechanical Specification
| American wire gauge | |
| SP9 | |
| Input wires | DG202 terminals 5P |
| Output wires | DG202 terminals 6P |
| Remark: Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged. | |
MCB recommendation:
| When the input voltage is 120Vac,the number of LED Driver matched by circuit breakers is as follows: | ||
| MCB Type | Level | The number of LED Driver |
| C type | 10A | 11 |
| 13A | 15 | |
| 16A | 19 | |
| 20A | 23 | |
| 25A | 29 | |
| When the input voltage is 277Vac,the number of LED Driver matched by circuit breakers is as follows: | ||
| MCB Type | Level | The number of LED Driver |
| C type | 10A | 7 |
| 13A | 10 | |
| 16A | 12 | |
| 20A | 15 | |
| 25A | 19 | |
Note：
1. The above quantities of the led drivers connected on the Type C is recommended base on the maximum ambient temperature is 50 ℃.
2. The breaker should be selected according to the input rated voltage, input rated current, ambient temperature, and trip characteristic
curve.
Dimming Operation
Related Products
|
Mode：SMT-012-080VD intput voltage：100-277vac
Size : 241*125*42.7MM |
